3D Printers Larid Tpreg 1KA04 Aluminum Clad Hybrid Metal Core PCB With Insulated Holes

Layers: 1 layer board, Materials: Aluminum Finished board thickness:4.0mm Special:Counterbore+Screw Holes Thermal conductivity:1.0W/M-K Surface treatment: Hasl Lead free The metal core of the thermal PCB can be aluminum (aluminum core PCB), copper (copper core PCB or a heavy copper PCB) or a...

Product Details

Layers: 1 layer board,

Materials: Aluminum

Finished board thickness:4.0mm

Special:Counterbore+Screw Holes

Thermal conductivity:1.0W/M-K

Surface treatment: Hasl Lead free 

  3D printing machine pcb .jpg


The metal core of the thermal PCB can be aluminum (aluminum core PCB), copper (copper core PCB or a heavy copper PCB) or a mixture of special alloys. The most common is an aluminum core PCB.

The thickness of metal cores in PCB base plates is typically 50 mil - 125 mil, but thicker and thinner plates are possible.MCPCB copper foil thickness can be  1 - 6 oz.


Automotive: Head lights, Tail light assemblies, Running side markers, Dash board, interior lighting.

Military: Head lights, Running lights, Spot lights, Signal beacons, High power flash lights, Power converters, Power supplies, Power transmission systems, Ignition systems, Power distribution products.


Aerospace: Aircraft landing lights, Running lights, Cabin mood lighting systems, Spot light and general lighting.

Consumer: Street lighting, Traffic control lighting, Interior building lights, Landscape lighting, Camping gear.

Medical: Operating room lighting, Surgical lighting tools, High power scanning technology, Power converters.

Finish Thickness:0.3-4.2mm

Min holes:0.8mm


Inquiry