High Power LED Driver Rogers Printed Circuit Board PCB 4350B RO4003C

High Power LED Driver Rogers Printed Circuit Board PCB 4350B RO4003C

Layers: 2 layer board, Materials: ROGERS 4350B/4003/5880/3003/3010/RO6010 Finished board thickness:1.6mm Special:plating edge board Surface treatment: HASL , Chemical tin, Chemical Gold, Immersion Silver/Gold, OSP, Gold plating Min. Hole Size:3mil (0.075mm) Min. Line Width:3 Mil (0.075 Mm) Min....

Product Details

Rogers  PCB.jpg

Layers: 2 layer board,

Materials: ROGERS 4350B/4003/5880/3003/3010/RO6010

Finished board thickness:1.6mm

Special:plating edge board

Surface treatment: HASL , Chemical tin, Chemical Gold, Immersion Silver/Gold, OSP, Gold plating


Min. Hole Size:3mil (0.075mm)

Min. Line Width:3 Mil (0.075 Mm)

Min. Line Spacing:3 Mil (0.075 Mm)

Surface Finishing:HASL/ Immersion Gold

Solder mask:Green; Blue; Black; Red; Yellow; white,etc..


Found pcb can offer you single&double sided PCB, Mutilayer PCB, HDI PCB, led Aluminum PCB, Flexible PCB, and Rigid-Flex PCB etc,

Rogers PCB are hydrocarbon ceramic laminates and prepares offer superior high frequency performance and low cost printed circuit fabrication resulting in a low loss material which can be fabricated using standard epoxy/glass (FR-4) processes. Rogers material is also referred as RO4000. It is used in PCB designs where power management, signal integrity and impedance matching is very crucial. Most common application, where Rogers Material is used are: high-speed designs, RF, microwave, mobile applications, etc.


Rogers dielectric PCB materials are perfect for RF applications and mobile phone design. They are also used is flexible PCB design. RO4000 material possesses the properties needed by designers of RF microwave circuits and matching networks and controlled impedance transmission lines. RO4000 series laminates offer a range of dielectric constants (2.55 – 6.15), are available with UL 94 V-0 flame retardant versions.


Inquiry