Basic Info • Model NO.: FD-09 • Dielectric: RO4350b • Flame Retardant Properties: V0 • Processing Technology: Electrolytic Foil • Insulation Materials: Glass Reinforced Hydrocarbon • Board Thick: 0.9mm • Legend Color: White • Minimum Trace and Space: 5.4 Mil/6.3 Mil • Via: Plated Through...
RO4350B 30mil Rogers Material High Frequency PCB Circuits 1.5 oz Copper board Green Solder Mask Applied In Splitter
Commodity Introduction This is a type of RO4350B PCB for the application of Splitter. It's a 2 layer board at 0.9mm thick. The base laminate is from Rogers Corp.. Solder mask and silkscreen from Taiyo. It's fabricated per IPC 6012 Class 2 using supplied Gerber data. Each 10 boards or panels are packed separately.
Parameters & Data Sheet
145 x 91mm=1PCS
Number of Layers
Double sided PCB
Surface Mount Components
Through Hole Components
copper ------- 35um(1oz)+plate TOP layer
RO4350B 30mil (0.762mm)
copper ------- 35um(1oz)+plate BOT Layer
Minimum Trace and Space:
Minimum / Maximum Holes:
Number of Different Holes:
Number of Drill Holes:
Number of Milled Slots:
Number of Internal Cutouts:
RO4350B 30mil (0.762mm), Tg 288ºC
Final foil external:
Final foil internal:
Final height of PCB:
PLATING AND COATING
Electroless nickel over Immersion Gold (ENIG)( 1 µ" over 100 µ" nickel)
Solder Mask Apply To:
Top and Bottom, 12micon Minimum.
Solder Mask Color:
Green, PSR-2000GT600D, Taiyo supplied.
Solder Mask Type:
Side of Component Legend
Colour of Component Legend
White, IJR-4000 MW300, Taiyo Supplied.
Manufacturer Name or Logo:
Marked on the board in a conductor and leged FREE AREA
Plated Through Hole(PTH)
UL 94-V0 Approval MIN.
100% Electrical Test prior shipment
Splitter, 24V Inverter Analog Device Variable Speed Drive IP CCTV 3G Signal Booster
TYPE OF ARTWORK TO BE SUPPLIED
email file, Gerber RS-274-X, PCBDOC etc
Found Quality Policy
Found has developed series of management procedures and approaches to assure that PCBs are in compliance with the customers' requirements, inclusive of selection of the vendors, work in progress (WIP) inspection, outgoing delivery inspection and customer service etc.
Control of Production Process Right manufacturing instruction (MI), comprehensive equipment management and maintenance and process control, strict WIP inspection and monitoring as well as working instruction, all those make the whole fabrication process totally controlled.
Final Control and Inspection All PCBs have to be gone through the open and short test as well as visual inspection after passed the specified physical tests. We own various advanced test equipment including customized, probe flying test machines to guarantee that each PCB is 100% tested.
Product Delivery Audit We set up a dedicated FQA department to inspect the PCB products according to the customer's specifications and requirements by sampling. Qualified PCBs are going to be packed.
FQA also has to carry out a 100% audit of the warehouse packing and shipping products, including product number, customer number, product quantity, shipping address and so on prior to shipment.
Customer Service We sets up a professional customer service team to proactively communicate with customers and timely deal with the customers' feedbacks. We highly focus on customers' needs and to understand customers' demands, timely to adjust the policy of customer service and PCB product requirements.