Edge Plating Rogers4003C PCB
Port: | Shenzhen,China |
Production Capacity: | 50000PCS/Month |
Payment Terms: | T/T, Western Union, Paypal |
Type: | Rigid Circuit Board |
Dielectric: | FR-4 |
Material: | Fiberglass Epoxy |
Flame Retardant Properties: | V0 |
Mechanical Rigid: | Rigid |
Processing Technology: | Electrolytic Foil |
General description:
Edge plating rogers4003C pcb is a type of double sided PCB built on FR-4 substrate with Tg 150°C for the application of GPS Tracking Devices. It's standard 1.60 mm thick, white silkscreen over green solder mask covers both sides and immersion gold are on pads. Half holes (edge castellation) are made on the edge for motherboard connection and soldering. Most of these PCB boards are used on the carrier board as a sub-board of the motherboard through which the semi-metallized holes are welded to the pins of mainboard and components. The base material is used from ITEQ IT-158, entire board supplying 12 PCBs per panel. They're fabricated per IPC 6012 Class 2 using supplied Gerber data. Each 25 panels are packed for shipment.
Parameter and data sheet:
PCB SIZE | 165 x 300mm=12PCS |
BOARD TYPE | Double Sided PCB |
Number of Layers | 2 layers |
Surface Mount Components | YES |
Through Hole Components | YES |
TECHNOLOGY | |
Minimum Trace and Space: | 4 mil / 4 mil |
Minimum / Maximum Holes: | 1.5 mm / 3.2 mm |
Number of Different Holes: | 9 |
Number of Drill Holes: | 215 |
Number of Milled Slots: | 0 |
Number of Internal Cutouts: | 48 |
Impedance Control: | no |
Number of Gold finger: | 0 |
BOARD MATERIAL | |
Glass Epoxy: | FR-4 Tg150ºC, er<5.4.IT-158, ITEQ Supplied |
Final foil external: | 1 oz |
Final foil internal: | NO |
Final height of PCB: | 1.6 mm ±0.16 |
PLATING AND COATING | |
Surface Finish | Immersion gold (32.1% ) 0.05µm over 3µm nickel |
Solder Mask Apply To: | TOP and Bottom, 12micron Minimum |
Solder Mask Color: | Green, PSR-2000GT600D, Taiyo Supplied. |
Solder Mask Type: | LPSM |
CONTOUR/CUTTING | Routing, stamp holes |