Multilayer Double-Sided HDI PCB OR High Tg PCB OR Heavy Copper PCB Prototyping

Layers: 10 layer board, Min line width/space:3.5mil/3.5mil Finished board thickness:2.0mm Tg: Tg180 Impedance control: +/-10% Min hole size: 0.25mm Surface treatment: Immersion Gold Layers: 2 layer board(Deep control) Min line width/space:5mil/5mil Finished board thickness:3.2mm Min hole size:...

Product Details

Layers: 10 layer board, 

Min line width/space:3.5mil/3.5mil

Finished board thickness:2.0mm

Tg: Tg180

Impedance control: +/-10%

Min hole size: 0.25mm

Surface treatment: Immersion Gold


Layers: 2 layer board(Deep control)

Min line width/space:5mil/5mil

Finished board thickness:3.2mm

Min hole size: 0.4mm

Surface treatment: Immersion Gold

Special: Deep control SLOT

We specialize in Supplying quick turn prototype, small and medium batches PCB manufacture services; double-sides PCB within 24 hours, multiple PCB within 48-96 hours.


Double sided PCBs probably are the most common type PCB. They allow for the routing of traces around each other by jumping between a top and bottom layer by way of vias. The ability to cross paths from top to bottom greatly increases the circuit designer's flexibility in circuits designing and lends itself to greatly increased circuit densities. This type of board is relatively low cost.


Multi-Layer PCB refer to printed circuit board has more than two copper layers, such as 4L, 6L, 8L, 10L, 12L, etc. As technology improving, people can put more and more copper layers on the same board. Currently, we can produce 1L-20L FR4 PCB.


Here are some popular High Tg board raw material in market:

S1170 & S1000-2: SYL (Shengyi Technology);

FR406, FR408, IS410 & DS370HR: Isola 

HR-01 & HR-02: Mica-AVA;KB

MCL-E-679: Hitachi;

N4000-6 & N4000-11: Nelco



Inquiry

You Might Also Like