Single-sided flexible circuits have a single conductor layer made of either a metal or conductive (metal filled) polymer on a flexible dielectric film. Holes may be formed in the base film to allow component leads to pass through for interconnection, normally by soldering. Single sided flex circuits can be fabricated with or without such protective coatings as cover layers or cover coats, however the use of a protective coating over circuits is the most common practice.
One conductive layer, either bonded between two insulating layers or uncovered on one side.
Access holes to conductors may be on either one or both sides.
FPC Single Sided Flexible Printed Circuit board PCB Polyimide Immersion Gold AppliedIn GPS
Commodity Introduction
This is a type of polyimide PCB for the application of Bluetooth. It's a single sided layer board at
0.1mm thick. The base laminate is from ITEQ, Solder mask and silkscreen from Taiyo. It's fabricated per IPC 6012 Class 2 using supplied Gerber data. Each 10 boards or panels are packed
separately.
Delivery Time for PCB board:
1) PCB production time: sample: 3-4 days / production: within 7 days
2) Fast pcb delivery: 24 hours for 2L ; 48 hours for 4L ; 72 hours for 6L.
3) Component purchase: 2 days if all components is available in our domestic market. PCB Assembly: samples: within 8 days / mass production: within 12 days